Manufacturing Jobs,Construction Jobs

Construction managers are in charge of construction projects, such as buildings, roads, or bridges. They receive the plans for a project and must figure out how to build it. Construction managers work out of a main office from which the overall construction project is monitored, or out of a field office at the construction site. Advances in telecommunications and Internet access allow construction managers to be onsite without being out of contact of the main office. Management decisions regarding daily construction activities generally are made at the jobsite. Managers may travel extensively when the construction site is not close to their main office or when they are responsible for activities at two or more sites. They consider various construction methods and decide which one is best for the job. They schedule all the activities that are involved in the construction project. They plan how long each step of the project will take and when each team of workers will be needed. On big jobs, managers use computers to plan the construction. They arrange for trade contractors to complete specific pieces of the project, such as plumbing or painting.Construction. Laborers also remove trees and debris, tend pumps, compressors and generators, and build forms for pouring concrete. They erect and disassemble scaffolding and other temporary structures. They load, unload, identify, and distribute building materials to the appropriate location according to project plans and specifications. Laborers also tend machines; for example, they may mix concrete using a portable mixer or tend a machine that pumps concrete, grout, cement, sand, plaster, or stucco through a spray gun for application to ceilings and walls. professions.

Plumbers install and repair plumbing equipment used for water distribution and waste water disposal. careers in construction,carpentry jobs,construction employment,construction job,construction vacancies,construction work,jobs in construction,jobs in manufacturing,manufacturing jobs Steamfitters and pipefitters lay out and repair piping systems carrying water, steam, chemicals and fuel. Sprinkler system installers install and repair fire protection sprinkler systems in buildings. Gas fitters install and maintain natural gas lines and equipment. Apprentices are included in this group.

Helpers assist mechanics with the repair of cars and industrial machinery. They also help repairers of electrical and electronic equipment. Helpers' jobs are entry-level jobs. They assist with repair tasks that do not require the skill of trained mechanics. They performs task like tend and observe equipment and machinery in order to verify efficient and safe operation, install or replace machinery, equipment, and new or replacement parts and instruments, using hand tools or power tools, disassemble broken or defective equipment in order to facilitate repair; reassemble equipment when repairs are complete, provide assistance to more skilled workers involved in the adjustment, maintenance, part replacement, and repair of tools, equipment, and machines, position vehicles, machinery, equipment, physical structures, and other objects for assembly or installation, using hand tools, power tools, and moving equipment.

Cost estimators forecasting the cost of future projects is vital to the survival of any business. Cost estimators develop the cost information that business owners or managers need to make a bid for a contract or to decide whether a proposed new product will be profitable. The cost estimator then prepares time-phase charts and learning curves. Time-phase charts indicate the time required for tool design and fabrication, tool debugging finding and correcting all problems manufacturing of parts, assembly, and testing. Learning curves graphically represent the rate at which the performance of workers producing parts for the new product improves with practice.

Quantity Surveyor

To receive work done description from production sector directly and scrutinize the same for correctness and adequacy before keying into the system and calculate the estimated value for the jobs.

To prepare costing sheet authorization, based on W.D.D received from the production sector.

To liaise and inter-act with other concerned section, department with the company on technical matters regarding specifications, nature and scope of work.

Follow up and co-ordinate with production sector to speed up the formalities for completed work and relevant documents.

To report discrepancies in the work done descriptions to concerned production sector and take up issue with sub-contractor for rectification.

Graduate with relevant Mechanical / Electrical Engineering Degree.

Skills

* Fluency in written and spoken English. Computer literate, preferably MS Word and MS Excel.

* Minimum 1 years in handling repair, preferably in shipyard of heavy engineering industry of repute.

Head Manufacturing

· Manages a manufacturing service organization of around 200 full time equivalents inclusive of contract services provided by external providers

· Manages departments or teams of engineers, technicians, relationship managers and operations support staff to ensure world class manufacturing service standards.

· Develops, monitors and adjusts project and operating budgets and schedules. Operating budget of around $8 Million

· Provides work direction and assistance to a group of professional staff, which includes monitoring the progress towards department/project goals, ensuring appropriate resources are available to support department/project initiatives, coaching, and performance management and training.

· Ensures that the departments support global engineering and manufacturing operations by providing manufacturing shared services to enable Enterprise Product Delivery Process or Enterprise Order Fulfillment Process activities, events and milestones

· Performs administrative duties related to team and individual performance management, salary pay plan, succession planning, resource planning, training, and development of direct reports.

· Identifies and maintains key external engineering service providers for performing work not considered a core competency

· Ensures intellectual property protection and provides a secure and scalable work environment

· Coaches, mentors and motivates project teams and staff to excel, innovate and provide world class manufacturing services

· Directs standard operating procedures for smooth process oriented operations

Manufacturing Engineer

Manager-Production: Degree/Dipl. Engineer with 15+ years hand-on experience. Proven ability to lead the production team and interface with Design and Quality control.

Planning engineers: 2 positions. Degree/Dipl engineer with 5+ years experience in equipment fabrication and project planning. Ability to work with planning tools a must.

Safety Engineer: Appropriate education with certification in safety. 5 years experience in safety practice in a fabrication industry.

Production supervisors: 3 positions. Diploma Memchnical engineers with 3 years experience in equipment fabrication. Must be ready to work in shifts.

Maintenance technician: Diploma/I.T.I in Electrical engg with appropriate certification. Minimum 5 years experience in maintenance of Cranes and other shop-floor equipment.

Production Supervisor (Food Industry)

- Production Planning for the Shift.

- Handling of Shop Floor manpower.

- Achieving of given Production Targets.

- Maintaining Good Hygiene on the Shop floor.

- Online Inspection of Finished Goods.

- Smart & Dynamic Candidates

- Ability to get work done

- BSc Chemistry Fresh or 1 to 2 years in FMCG manufacturing preferred

Sr. / Jr. Engineer Maintenance

Knowledge of hydraulic,M/C, DG Set, Pneunatics, electrical,can handle independently preventive maintainance, schedule maintainance and breakdown maintainance.EOT cranes, Hoist, Material Transmission Equipment like conveyer belt, elevators, Induction Melting Equipments. Experienece of foundry .cement industry is preffered. Ready to work in three shifts.

Sr. Engineer / Engineer CNC Machine Electrical Maintenance

Should be responsible for Preventive, corrective & Electrical breakdown maintenance of various
CNC machines. Troubleshooting of CNC machines. Responsible for timely implementation
of all policies and decision of Management. Should have worked with auto component /
Electrical Plant.
B.tech Electrical / Diploma Electrical; To look after the spare parts planning of spares used in
various machines and to maintain the inventory status and control of same. Should have
supervisory skills, good communication & pleasing personality.

Team Member/ Project Leader- Manufacturing Execution System

You should preferably have a graduate or postgraduate engineering degree in Chemical/ Industrial/Process from a reputed institute with an excellent academic record. Other engineering graduate or postgraduate with strong manufacturing domain knowledge are also welcome.

Skills / Experience Sought

2-10 years experience in the following areas:
Experience of direct manufacturing or other functional experience in a manufacturing company
Experience in configuring any MES package (Simatic IT, Wonderware ArchestrA, RA Factory Talk, GE Fanuc, Camstar, Apriso, Visiprise etc.)
Specific domain knowledge relevant to technology implementation or industry specific solutions
Familiar with integration approaches, framework technologies, or other application integration toolsets
Familiar with.NET/ J2EE platform
Exposure to OOAD concepts
Good communicator – both written and in executive level presentation

Purchase Officer

The preparation and valuation of progress and final payments in connection with any contract or sub-contract, checking & processing of the bills in case of materials received with necessary supporting like challans, GRN, etc. and talking to vendor

Estimation & costing Engineer

The candidate should be BE/Diplom in Mechnical with 0-2 yrs of experience.

-Candidate should be familiar about tender, enquiry submission Procedure
-Preparation of Quotation as all technical & commercial terms and conditions
-Knowledge of Piping codes & standards like ASTM, ASME, ANSI, BS, IS, DIN is additional advantage.
-Estimate/costing of finish products & decide the selling price of products

Site-In-Charge: Substation Maintenance

Supervise daily report preparation regarding Load, voltage & Frequency, Energy reconciliation.
Supervise a daily & monthly report regarding breakdown in plant, S/D in plant.
Prepare Daily /Weekly /Monthly Energy consumption Report.
Prepare Schedule for Preventive & Predictive maintenance in plant.
Monitor House Keeping, Safety Awareness & Implantation & prepare a performance report of these activities.
Maintenance Aspects of Sub Station & Switch Yard Equipment’s

Plumber

Assemble pipe sections, tubing and fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, or soldering, brazing and welding equipment.

Fill pipes or plumbing fixtures with water or air and observe pressure gauges to detect and locate leaks.

Review blueprints and building codes and specifications to determine work details and procedures.

Prepare written work cost estimates and negotiate contracts.

Study building plans and inspect structures to assess material and equipment needs, to establish the sequence of pipe installations, and to plan installation around obstructions such as electrical wiring.

Keep records of assignments and produce detailed work reports.

Perform complex calculations and planning for special or very large jobs.

Locate and mark the position of pipe installations, connections, passage holes, and fixtures in structures, using measuring instruments such as rulers and levels.

Measure, cut, thread, and bend pipe to required angle, using hand and power tools or machines such as pipe cutters, pipe-threading machines, and pipe-bending machines.

Install pipe assemblies, fittings, valves, appliances such as dishwashers and water heaters, and fixtures such as sinks and toilets, using hand and power tools.

Cut openings in structures to accommodate pipes and pipe fittings, using hand and power tools.

Hang steel supports from ceiling joists to hold pipes in place.

Repair and maintain plumbing, replacing defective washers, replacing or mending broken pipes, and opening clogged drains.

Direct workers engaged in pipe cutting and preassembly and installation of plumbing systems and components.

Officer/Assistant – Production

-Ensure quality production and packing delivery as per the instruction of superior.
- Ensure accurate maintenance/timely update of BMR and periodical in-process quality checks and feedback to superior
-Implementation of process manual and quality norms (SOPs)
-Assist superior in planning organizing and control resources required
-Ensure safety of workers.
-Ensure housekeeping of the product section in line with the plant guidelines

Trades/Skills Trainer

Minimum 3 years work experience in training construction skills to trainees in any of the following fields of Carpentry, concreting, steel fixing, brickwork & plastering, electrical, plumbing & scaffolding.

Note: the scaffolding trainer/s need to be a Government accredited licensed trainer

The position initially is based in Mumbai however some Travel will be required.

Reporting to the Trades School Manager, the successful applicants will be responsible in assisting with trades/skills training in our training centres.